Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Alexandria Homeowners
Chimney cap and crown work in Alexandria typically costs $350-$1,400 depending on whether you need a simple cap replacement or full crown repair, and most jobs wrap up in a single visit. The crown is the concrete slab at the very top of your chimney, and when it cracks, water gets behind the brick and starts a slow-motion rebuild bill. Wendell Pike has been fixing caps and crowns in Alexandria since 1999, and he’ll tell you straight if the job can wait or if you’re looking at trouble before the next hard freeze.
We’re the locally owned shop that answers the phone with a live person, quotes a flat price before any tool comes off the truck, and stamps every job with a 90-Day Done Right Promise in writing. That means if the cap whistles or the crown coating doesn’t hold, one call brings us back at no charge. Call Top Hat Chimney at (571) 521-4837 for a free estimate on chimney cap and crown work in Alexandria, VA.
What Our Chimney Cap & Crown Service Includes
Every chimney has two things standing between your living room and rain, squirrels, and chimney fires: the cap on top and the crown underneath it. When either one fails, the repair is always cheaper on the front end than the masonry rebuild on the back end. Here’s exactly what we do, in plain English.
Cap Installation
A chimney cap is a metal lid that sits over the flue opening, and its job is simple: keep water, birds, and burning embers where they belong. Without one, rain runs straight down your flue and pools at the base of your firebox, which is how you end up with that damp, musty smell in your living room every time it rains. Alexandria gets around 44 inches of rain a year, and an uncapped flue is just an open pipe waiting for it. Wendell and his crew install stainless steel and copper caps sized to your exact flue, with screens that keep out starlings, chimney swifts, and the gray squirrels that work the old oak trees through Rosemont and Del Ray. When we install a cap, we always check the crown underneath it too, because a new cap on a cracked crown is like a new roof on a rotten deck.
Cap Replacement
Caps rust out, blow off in windstorms, or get dented by falling branches, and the fix is almost always straightforward. If your existing cap is pulling away from the flue or the screen has rusted through, you’re burning money every time a bird nests in there or a driving rain finds its way down. The replacement decision comes down to condition: if the cap is sound, we’ll say so, and if it’s shot, we’ll show you why. Top Hat Chimney keeps a truck stocked with common cap sizes, which means a replacement often happens on the same visit as the inspection. No second trip, no “parts on order” runaround.
Crown Repair
The crown is the concrete or mortar slab that seals the top of the chimney, and it takes a beating from freeze-thaw cycles more than anything else. Alexandria winters dip below freezing often enough that any hairline crack becomes a water ingress point within a season or two. Once water gets into that masonry, it expands when it freezes, and the crack widens, and you’re no longer talking about a crown repair. You’re talking about a rebuild. We repair crowns by removing deteriorated material, filling and resurfacing with a breathable concrete-based compound, and cutting a drip edge where needed so water sheds off instead of running down the brick. For most Alexandria homes, a properly repaired crown buys you 15 to 20 years.
Crown Coating
Sometimes the crown has the right bones but the wrong skin. A crown coating is a flexible, watertight seal applied over the existing crown that bridges small cracks and buys you years before a full repair is necessary. We use commercial-grade crown coat products, applied after the surface is cleaned and primed, and we don’t rush the cure. A coated crown done right sheds water like a waxed car hood, and it’s one of the most affordable preventive steps an Alexandria homeowner can take. If your crown is too far gone for a coating to help, we’ll tell you that too, and show you the camera footage so you can see exactly what we see.
Multi-Flue Cap
Older Alexandria homes often have chimneys with two or even three flues running through the same stack. A multi-flue cap covers the entire top of the chimney rather than individual flue openings, which gives you better protection against wind-driven rain and creates a cleaner look. These are custom-fabricated to your chimney’s exact footprint, often with a center support so snow load doesn’t bow the metal over time. Wendell has measured and installed multi-flue caps on everything from single-story ranchers in Lincolnia to century-old brick twins in Old Town, and the fit is always dead-on because the template comes from your chimney, not off a shelf.
Custom Cap
When a standard cap won’t fit, or the homeowner wants something that matches the house’s copper gutters or slate roof, we fabricate a custom cap to order. This is the right move for odd flue shapes, oversized flues, or chimneys where the aesthetic matters as much as the function. The custom route costs more because someone is shaping metal to your specific dimensions, but it’s the only clean answer when nothing stock fits right. We source our cap work through Olympia Chimney and Famco, both names we’ve trusted for years because the steel holds up and the hardware doesn’t fail at the first nor’easter.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Chimney Cap & Crown
Ask anyone on your street what brand their fireplace or chimney components run, and most won’t know until something breaks. We do. Wendell’s trucks carry parts and hardware from the manufacturers we’ve installed and serviced across Northern Virginia for over 29 years, and we know which ones hold up and which ones don’t.
Olympia Chimney has been our go-to for stainless steel caps and liners since early on, back when a lot of Alexandria contractors were still using whatever galvanized steel the supply house had in the back. Olympus caps hold their shape in high wind, the screens are fine enough to keep pests out, and the mounting hardware is built for decades, not seasons. We’ve installed hundreds across Alexandria, Springfield, and Woodbridge, so when your existing Olympia cap needs service, we do it right and we do it once.
Famco makes some of the cleanest stock caps and termination products we work with, especially for masonry chimneys with standard flue sizes. Their louvered and hooded caps fit tight and lock down securely, and we’ve found their designs handle Alexandria’s wind-driven rain better than most. We service, replace, and install Famco products, and we can honestly say we’ve only ever seen warranty-worthy failures from installation error, not product error.
For crown work that needs a flexible coating or a rebuild, we trust Copperfield and DuraFlex products. Copperfield’s crown sealer and DuraFlex’s liner systems are the kind of materials that cost more up front and earn it back over the next decade. Whether you have one of those brands or something else entirely, we can help. The name on the chimney matters less than the name on the work.
Signs You Need Chimney Cap & Crown Right Now
Some chimney problems announce themselves with a puff of smoke in the living room. Cap and crown issues are quieter, and by the time you notice them, the damage is usually underway. If any of these sound familiar, take a look or give us a call at (571) 521-4837.
- Water in the firebox or a musty smell after rain. This is the most common sign in Alexandria, and it almost always traces back to a missing cap or a failed crown. Water doesn’t run uphill, so when you find it pooled at the base of your fireplace, it came down the flue or through the masonry.
- Visible cracks in the concrete crown at the chimney top. Here’s the one you can check from the yard. Hairline cracks become quarter-inch cracks after a winter or two of freeze-thaw, and quarter-inch cracks become spalling brick and water stains inside the house.
- Bird noise, nest debris, or animal activity in the chimney. A chimney without a cap is an open invitation for chimney swifts, starlings, and whatever else can squeeze through. Flue obstructions from nests are a fire risk, and the pest removal alone costs more than the cap would have.
- A cap that’s leaning, rusted through, or missing entirely. Windstorms and falling branches knock caps loose more often than people realize. A cap that’s off its mount is doing zero good, and a rusted-through screen is doing even less.
- Efflorescence, crumbling brick, or white staining on the chimney exterior. That white powdery stuff is salt being pushed out of the brick by water moving through it, and it’s a direct message from the masonry. The water usually got in through the crown, not the brick faces.
None of these are a panic-and-call-the-fire-department emergency, but they all get more expensive the longer they sit. First-degree creosote is a brush job. Third-degree is a glaze. Catch it early. The same math applies to crowns.
Our Chimney Cap & Crown Process - Step by Step
When you call Top Hat Chimney for cap and crown work in Alexandria, you know what’s happening before the work starts. Here’s the sequence, in the order it actually happens.
- 1
The free estimate and upfront pricing. We send someone out to look at the actual chimney, not a photo, not a satellite view. The number we quote before any tool comes off the truck is the number on your invoice. No trip charge inside the county. No surprise line items. Wendell has walked onto more Alexandria roofs than he can count, and he can usually size up the job in ten minutes.
- 2
The camera inspection. If there’s any question about what’s happening below the cap or behind the crown, we run a camera down the flue and show you the footage. You see what we see. That means every recommendation is backed by evidence in your hand, not a story you’re supposed to take on faith. The camera footage and a plain-English verdict, every time, no exceptions.
- 3
The work itself. We remove the old cap, repair or coat the crown as discussed, and install the new cap with mechanical fasteners and high-temp sealant. All work is done by background-checked crew members in uniform, and you get a real arrival window. If that window slips, we call you. You’re never waiting around wondering.
- 4
The walkthrough and the photo report. When the work’s done, we show you what was installed and what condition the crown is in. You get a written summary and photos of your own chimney, so there’s a record in your file from day one. That matters when you sell the house, and it matters when a storm rolls through two years later.
- 5
The 90-Day Done Right Promise in writing. Every job ends with the same thing: our name, our license number, and a written promise that if the work isn’t right, one call brings us back. No charge, no argument, no chasing anyone down. Wendell lives in the same communities he serves. He’ll run into you again on Saturday, so the work has to be right.
How Much Does Chimney Cap & Crown Cost in Alexandria?
What moves the price is mostly three things: the chimney’s height and roof access, the condition of the crown underneath, and whether the flue needs a standard cap or a custom fabrication. Second-story chimneys on steep roofs in Fairlington or along the George Washington Parkway corridor take more setup time and safety rigging. Masonry that’s crumbling needs more prep before a crown coating will bond properly. And a chimney with an odd flue shape needs a custom cap instead of a stock unit off the shelf.
How do you avoid overpaying? Get the camera footage and ask the sweep to prove the crown is actually failing before agreeing to a rebuild. A lot of national outfits push full crown replacement when a $500 coating would buy years of life. We don’t do that. If your crown can be coated and saved, we’ll say so and save your money. Every estimate is free, and there’s also a standing offer on the table at all times for Alexandria homeowners: $40 off any repair over $200, and a free second opinion on any competing written estimate. Call (571) 521-4837 and ask Wendell to take a look.
Chimney Cap & Crown Near Alexandria - Our Service Area
Top Hat Chimney works throughout Alexandria and the surrounding Northern Virginia communities, including Lincolnia, Woodlawn, Rose Hill, Franconia, Fort Hunt, Groveton, Newington, Mount Vernon, and Lorton. If you’re inside our county, there’s no trip charge, period. We also serve Chimney Cap & Crown in Springfield and Chimney Cap & Crown in Woodbridge with the same crew, the same pricing rules, and the same written promise. Scheduling is fastest when you call early in the week, but we keep room in the schedule for genuine water intrusion cases because those don’t improve by waiting.
Serving Alexandria, VA - Our Local Coverage Area
We’re based in the Alexandria area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

Frequently Asked Questions - Chimney Cap & Crown in Alexandria
A chimney cap is the metal lid that sits over the flue opening to keep out rain, animals, and sparks, while the crown is the concrete slab at the top of the masonry that seals the chimney against water. The cap protects the inside of the flue and the crown protects the brick and mortar from water intrusion. Both work together, and when either one fails, the Chimney Cap & Crown cost guide shows how repair bills start climbing. Call (571) 521-4837 if you want us to take a look at both during one visit.
Most Alexandria Chimney Cap & Crown replacements and crown coatings are completed in a single visit of two to four hours. Crown repairs that involve significant masonry removal or custom cap fabrication typically take one to two visits, with the cap measuring done on the first visit. We’ll give you a real time window before we arrive and call you if anything changes.
Plan on $350-$750 for a standard cap installation, $500-$1,100 for crown repair, and $1,400 or more for a full custom crown rebuild on a large chimney; see our Springfield Chimney Cap & Crown pricing for comparison. The main variables are roof access, flue size, and how far the crown has deteriorated. For an exact quote in Alexandria, call (571) 521-4837. Estimates are free, and the number we quote is the number you pay.

Yes. We install and service Olympia Chimney, Famco, Copperfield, and DuraFlex products, and we work on every other major brand we encounter in Alexandria homes. The specific brand matters less than the condition and fit, and we stock the common sizes and hardware on the truck. If you have a brand you’re not sure about, call us. If we can’t identify it from your description, we’ll identify it on the roof.
Yes, and we answer the phone around the clock, seven days a week. A missing cap that’s letting water pour into your firebox during a storm is worth a call, not a wait. If the situation is truly urgent, Wendell can often be there the same day in Alexandria or the next morning at the latest for Chimney Cap & Crown in Mount Vernon and nearby areas. There’s no extra fee for the fact that you called at a bad hour.
Every job is backed by our 90-Day Done Right Promise in writing, which says that if the work isn’t right, one call brings us back at no charge. Manufacturer warranties on caps and crown materials run longer and we handle the paperwork for those too. But the short version is this: if something’s wrong within 90 days, we fix it, no questions, no runaround.
Not much to do on your end. Clear any furniture or decor away from the fireplace opening if the work involves a camera inspection, and make sure the roof access is reachable, meaning a clear path to your access point if you have one. We handle the rest, from the roof harness to the drop cloths. If there’s anything specific we need, we’ll tell you when we confirm the appointment.
Schedule Your Chimney Cap & Crown Service in Alexandria Today
A cracked crown doesn’t send you a reminder, and an open flue doesn’t care what month it is. Once a year, burn or no burn. Chimneys break in the off-season too. Call (571) 521-4837 today and get a free, no-obligation estimate on chimney cap and crown work in Alexandria, VA. A live person answers, the price is on paper before we start, and every job carries the 90-Day Done Right Promise. Wendell and his crew will be there when we say we’ll be there, and the work will be done right the first time.
Written by Wendell Pike, Owner at Top Hat Chimney, serving Alexandria since 1999.





Before
After
Before
After
Before
After